View the setpoint temperature and measured temperature in the room.
Manual temperature change
Press the Smart Thermostat to change the setpoint temperature.
Materials
Translucent plexiglass cube
Choose a minimalist and timeless design. Its energy-saving design provides a longer battery life.
Specifications
Dimensions
83x83x22 mm
Features
Designed for indoor use only.
Temperature can be changed on the Thermostat.
Translucent plexiglass cube designed by Starck.
Programmable Thermostat with smart functionality. E-Paper display.
Can be customised with 1 of 4 coloured adhesives provided.
Sensors and measurements
Temperature (measured):
Measurement range0°C to 50°C (± 0.1°C)
Temperature (setpoint):
Unit°C
Adjustment range5°C to 30°C (± 0.5°C)
Installation and compatibility
The Netatmo Smart Thermostat is compatible with most boiler models (electric, gas, oil, wood) and heat pumps. If you’re unsure, you can check your compatibility on check.netatmo.com.
Replaces wired and wireless thermostats or can be installed as a new Thermostat
Thermostat and dry-contact Relay, potential free (ON/OFF)
Switching capacitymax 120 VA (4 A load @ 30 V, 1 A load @ 110 V/120 V or 0.5 A load @ 220 V/240 V)
Switching currentmax 4 A
Switching voltagemax 250 VAC
Power factorcos φ > 0.8
Free app, for life
Subscription-free
App compatibility
iPhone and iPad compatibility
Android compatibility
A recent version of Android with access to Play Store is recommended.
PC & Mac through the Webapp
System requirements
Wireless high-speed internet access. Hotspots are not supported
Connectivity specifications
Between the Relay and the internet routerWi-Fi 802.11 b/g/n (2.4 GHz)
Between the Thermostat and the RelayLong-range radio (868 MHz)
Supported security protocols
Open/WEP/WPA/WPA2-personal (TKIP and AES)
Power and batteries
Thermostat3 AAA batteries (up to 2-year battery life*)
